HSC Study

Products of Reactions Involving Hydrocarbons

Addition of hydrogen, halogens, hydrogen halides and water to alkenes and alkynes, with conditions and Markovnikov's rule, tests for unsaturation, and substitution of alkanes with halogens in UV light.

70 min · Module 7: Organic Chemistry

Assumes you have read Hydrocarbons.

The full teaching. Start here.

The short version

Alkenes and alkynes undergo addition. The π bond breaks and the reagent adds across it. There is one product and nothing is left over.

ReagentConditionsProduct from ethene
H₂Ni, Pt or Pd catalyst, heatethane
Br₂ or Cl₂room temperature1,2-dibromoethane
HBr or HClroom temperaturebromoethane
H₂OH₃PO₄ or dilute H₂SO₄ catalyst, heatethanol

Markovnikov's rule. When HX or H₂O adds to an unsymmetrical alkene, the H goes mostly to the carbon that already has more H atoms.

Test for unsaturation. An alkene or alkyne decolourises bromine water immediately. An alkane does not.

Alkanes undergo substitution with Cl₂ or Br₂, but only in UV light. A hydrogen is replaced and HX forms as well:

Why alkenes add and alkanes substitute

A C=C bond is one σ bond plus one weaker π bond, whose electrons sit exposed above and below the bond axis.

  • Alkenes and alkynes. Reagents attack the π electrons. The π bond breaks and each carbon gains a new σ bond. The shape at those carbons changes from trigonal planar to tetrahedral.
  • Alkanes have only strong σ bonds and no π electrons to attack. They react only if the halogen is first split into reactive atoms by UV light. Even then, the carbon cannot gain a bond, so a hydrogen must be replaced.
etheneCH₂=CH₂ethaneCH₃CH₃bromoethaneCH₃CH₂BrethanolCH₃CH₂OH1,2-dibromoethaneCH₂BrCH₂Br+ H₂Ni/Pt, heat+ HBrroom temp.+ H₂O (steam)H₃PO₄ or H₂SO₄, heat+ Br₂room temp., dark+ Br₂, UV lightsubstitution (+ HBr)addition reactions
The main reactions of ethene. All four solid arrows are additions with one product each. The dashed arrow is substitution of the alkane in UV light, which gives HBr as a by-product.

CheckpointAnswer before reading on.

Which statement best describes an addition reaction of an alkene?

Select one answer

Hint 1The π bond breaks.

Hint 2Atoms join to each carbon of the C=C.

Hint 3Is anything left over?

Addition of hydrogen

H–H is strong, so a metal catalyst is needed. H₂ and the alkene both bind to the metal surface, where the H–H bond is weakened, and then the alkane is released.

  • Margarine is made by partly hydrogenating vegetable oils. Removing some C=C bonds straightens the chains, so they pack more tightly and the fat becomes a soft solid.
  • Alkynes add two moles of H₂ to become alkanes.

CheckpointAnswer before reading on.

Which conditions are needed for ethene to react with hydrogen?

Select one answer

Hint 1H–H is a strong, non-polar bond.

Hint 2A metal surface weakens it.

Hint 3Transition metals are used.

CheckpointAnswer before reading on.

Vegetable oils are partially hydrogenated to make margarine. Why does this turn a liquid into a soft solid?

Select one answer

Hint 1Hydrogenation removes C=C.

Hint 2C=C bonds put kinks in the chains.

Hint 3Straighter chains pack closer.

CheckpointAnswer before reading on.

Ethyne reacts with excess hydrogen over a platinum catalyst. What is the product, and how many moles of H₂ react per mole of ethyne?

Select one answer

Hint 1A triple bond has two π bonds.

Hint 2Each π bond adds one H₂.

Hint 3Excess H₂ goes all the way.

Addition of halogens

Chlorine and bromine add rapidly at room temperature, with no catalyst. One halogen atom goes to each carbon:

An alkyne adds one Br₂ to give a dibromoalkene, then a second Br₂ to give a tetrabromoalkane. Each C=C uses exactly one Br₂, so the moles of Br₂ used tell you the number of double bonds.

The bromine water test.

  • Orange-brown bromine water is decolourised immediately by an alkene or alkyne.
  • An alkane leaves it coloured, unless it is left in UV light, when it fades slowly.
  • Acidified or alkaline potassium permanganate (Baeyer's reagent) gives the same distinction. With an alkene, the purple colour disappears.

CheckpointAnswer before reading on.

What is the product when propene reacts with bromine?

Select one answer

Hint 1Br₂ is symmetrical.

Hint 2One Br goes to each carbon of the C=C.

Hint 3The C=C is between C1 and C2.

CheckpointAnswer before reading on.

Bromine water is shaken with hexane and with hex-1-ene, in the dark. What is observed?

Select one answer

Hint 1Only the alkene has a π bond.

Hint 2Addition is fast without light.

Hint 3Alkane substitution needs UV.

CheckpointAnswer before reading on.

One mole of ethyne reacts with one mole of bromine. What is the product?

Select one answer

Hint 1Only one π bond reacts.

Hint 2One Br on each carbon.

Hint 3A C=C remains.

Exam question

Standard · about 5 min

3 marks

Describe a chemical test to distinguish between cyclohexane and cyclohexene. Include observations and an equation.

Hint 1Bromine water.

Hint 2Which one has a C=C?

Hint 3What colour change?

Where students lose marks on this one
  • Using a flame test.

    Why it happens: Both burn.

    Use a reagent that reacts only with C=C.

Written for this site.

Exam question

Standard · about 4 min

2 marks

What mass of bromine (159.8 g mol) reacts with 0.0100 mol of hex-1-ene?

Hint 1One C=C reacts with one Br₂.

Hint 2n(Br₂) = 0.0100 mol.

Hint 3m = nM.

Where students lose marks on this one
  • Using the atomic mass of Br.

    Why it happens: Bromine is Br₂.

    Use 159.8.

Written for this site.

Exam question

Harder · about 4 min

2 marks

0.050 mol of an unsaturated hydrocarbon with no triple bonds reacts completely with 0.150 mol of . How many C=C double bonds does each molecule contain?

Hint 1Each C=C adds one Br₂.

Hint 2Find the mole ratio.

Hint 30.150 / 0.050.

Where students lose marks on this one
  • Dividing the wrong way.

    Why it happens: Moles of Br₂ per mole of hydrocarbon.

    Br₂ over hydrocarbon.

Written for this site.

Exam question

Standard · about 4 min

2 marks

A student uses a molecular model kit to show the reaction of ethene with chlorine. Describe what changes in the model.

Hint 1One bond of the double bond is removed.

Hint 2Cl atoms attach.

Hint 3Shape around each carbon.

Where students lose marks on this one
  • Leaving the double bond and attaching Cl.

    Why it happens: Carbon would then have five bonds.

    Break one C=C bond.

Written for this site.

Addition of hydrogen halides

HCl, HBr and HI add at room temperature, with H going to one carbon and X to the other. The product is a haloalkane, not an alkane:

Unsymmetrical alkenes give two products. With propene, the Br can end up on C1 or on C2. Markovnikov's rule predicts the major product: the H adds to the carbon of the C=C that already has more hydrogens. So the Br goes to the carbon with fewer hydrogens.

Worked example2 marks

Predicting the major product

Name the major and minor products when propene, CH₂=CHCH₃, reacts with HCl.

Find the carbon with more H

Markovnikov's rule.

C1 (CH₂=) has two H atoms, and C2 (=CH–) has one. So the H of HCl adds to C1.

Place the Cl

The other part of the reagent goes to the other carbon.

Cl goes to C2, giving CH₃CHClCH₃.

Answer

Major product: 2-chloropropane. Minor product: 1-chloropropane.

CheckpointAnswer before reading on.

What is the product of ethene and hydrogen bromide?

Select one answer

Hint 1HBr adds across the C=C.

Hint 2H on one carbon, Br on the other.

Hint 3Ethene is symmetrical.

CheckpointAnswer before reading on.

What is the major product when propene reacts with HCl?

Select one answer

Hint 1Propene is unsymmetrical.

Hint 2Markovnikov: H adds to the carbon that already has more H.

Hint 3CH₂= has more H than =CH–.

Exam question

Harder · about 5 min

3 marks

But-1-ene reacts with HBr to form two products. Name both, identify the major product, and explain why two products form.

Hint 1Is but-1-ene symmetrical?

Hint 2Br can go on C1 or C2.

Hint 3Markovnikov’s rule.

Where students lose marks on this one
  • Saying but-2-ene forms.

    Why it happens: Addition removes the C=C.

    Products are saturated.

Written for this site.

Exam question

Harder · about 1 min

1 mark

What is the major product when 2-methylpropene, (CH₃)₂C=CH₂, reacts with HBr?

Select one answer

Hint 1Markovnikov’s rule.

Hint 2H goes to the CH₂ carbon.

Hint 3Br goes to the carbon with two methyls.

Where students lose marks on this one
  • Choosing 1-bromo-2-methylpropane.

    Why it happens: That is the minor product.

    H to the carbon with more H.

Written for this site.

Addition of water

Water adds only with an acid catalyst and heat. Industry passes ethene and steam over phosphoric acid; in the lab, dilute sulfuric acid is used:

HCl cannot be the catalyst, because it would add to the alkene itself and form a chloroalkane.

  • Unsymmetrical alkenes follow Markovnikov's rule: propene gives mainly propan-2-ol.
  • Symmetrical alkenes give only one product: but-2-ene gives only butan-2-ol.

CheckpointAnswer before reading on.

Which conditions are used industrially to hydrate ethene to ethanol?

Select one answer

Hint 1Water adds across the C=C.

Hint 2An acid catalyst is needed.

Hint 3HCl would add itself instead.

CheckpointAnswer before reading on.

What is the major product of the acid-catalysed hydration of propene?

Select one answer

Hint 1Markovnikov: H to the CH₂ carbon.

Hint 2OH goes to the middle carbon.

Hint 3A secondary alcohol.

CheckpointAnswer before reading on.

Why does but-2-ene give only one product with water, while but-1-ene gives two?

Select one answer

Hint 1Look at the groups on each side of the C=C.

Hint 2Where can OH go?

Hint 3Symmetry.

Exam question

Standard · about 4 min

2 marks

What mass of ethanol (46.07 g mol) forms when 14.0 g of ethene (28.05 g mol) is completely hydrated?

Hint 1Find moles of ethene.

Hint 2Ratio 1 : 1.

Hint 3m = nM.

Where students lose marks on this one
  • Using the ethene molar mass for the product.

    Why it happens: Convert moles to mass with the ethanol molar mass.

    Use 46.07.

Written for this site.

Common mistake

HBr adds to an alkene to give an alkane.

Why it happens: The product is saturated, so it gets called an alkane.

The product contains a halogen, so it is a haloalkane, such as bromoethane. An alkane contains only C and H. In the same way, water gives an alcohol, and only H₂ gives an alkane.

Worked example4 marks

Four additions to propene

Write an equation, state the conditions and name the organic product (the major one where there are two) when propene reacts with hydrogen, bromine, hydrogen bromide and water.

Hydrogen

H–H is strong, so a metal catalyst is needed.

, propane.

Bromine

One Br adds to each carbon of the C=C; no catalyst.

at room temperature, 1,2-dibromopropane. The orange-brown colour disappears.

Hydrogen bromide

Unsymmetrical alkene, so apply Markovnikov's rule.

at room temperature. The major product is 2-bromopropane; 1-bromopropane is the minor product.

Water

Needs an acid catalyst and heat; Markovnikov's rule again.

. The major product is propan-2-ol.

Answer

Propane (Ni, heat), 1,2-dibromopropane (room temperature), 2-bromopropane (room temperature, major product) and propan-2-ol (H₃PO₄ catalyst, heat, major product). All four are addition reactions across the π bond, and each gives a saturated product.

Substitution of alkanes

Alkanes react with chlorine or bromine only in UV light (or at high temperature). The UV splits the halogen molecule into two atoms, each with an unpaired electron (radicals). These atoms pull an H off the alkane. One H is replaced at a time, and HX forms at each step:

Substitution gives a mixture of products. Longer alkanes also give position isomers: propane gives both 1-chloropropane and 2-chloropropane.

  • Fluorine reacts explosively.
  • Chlorine and bromine need UV light.
  • Iodine barely reacts.

Worked example3 marks

Chlorinating ethane

Ethane is mixed with chlorine and exposed to UV light. Write equations for the first two substitution steps, name every organic product of the second step, and describe a test that distinguishes ethane from ethene.

First substitution

UV splits Cl₂; one H is replaced and HCl forms.

, giving chloroethane.

Second substitution

The second Cl can replace an H on either carbon.

. The two isomers are 1,1-dichloroethane (CH₃CHCl₂) and 1,2-dichloroethane (CH₂ClCH₂Cl).

Distinguishing test

Only the alkene has a π bond to add across.

Shake each with bromine water in the dark. Ethene decolourises it immediately. Ethane leaves it orange-brown unless it is exposed to UV light, and even then the colour fades only slowly.

Answer

Chloroethane, then a mixture of 1,1- and 1,2-dichloroethane, with HCl formed at every step. Substitution gives a mixture, which is why it is a poor way to make one pure haloalkane. Bromine water in the dark separates the alkene from the alkane.

Addition compared with substitution:

Addition (alkenes)Substitution (alkanes)
Bond broken in the hydrocarbonπ bondC–H σ bond
Conditions with Br₂dark, room temperature, fastUV light, slow
Productsonetwo (organic product and HX)

CheckpointAnswer before reading on.

What are the products when methane reacts with a limited amount of chlorine in UV light?

Select one answer

Hint 1Substitution replaces one H.

Hint 2The H joins the other Cl.

Hint 3Two products.

CheckpointAnswer before reading on.

How does substitution of an alkane differ from addition to an alkene?

Select one answer

Hint 1Count the products.

Hint 2Substitution replaces H; addition breaks π.

Hint 3Conditions differ.

Exam question

Harder · about 5 min

3 marks

Methane reacts with excess chlorine in UV light. Write equations for the successive substitution steps and name each organic product.

Hint 1One H replaced per step.

Hint 2Each step also makes HCl.

Hint 3Four steps in total.

Where students lose marks on this one
  • Writing CH₄ + 4Cl₂ → CCl₄ + 4HCl as the only answer.

    Why it happens: Substitution happens one H at a time.

    Show each step.

Written for this site.

Exam question

Harder · about 4 min

2 marks

Propane reacts with a limited amount of chlorine in UV light. How many different monochloro products can form?

Hint 1Where can one Cl go?

Hint 2End carbons are equivalent.

Hint 3Middle carbon is different.

Where students lose marks on this one
  • Counting 3, one for each carbon.

    Why it happens: C1 and C3 are equivalent.

    Name each product.

Written for this site.

Exam question

Harder · about 7 min

4 marks

Compare what happens when bromine is added to hexane and to hex-1-ene, first in the dark and then in UV light. Include equations.

Hint 1Dark: which one reacts?

Hint 2UV: splits Br₂ into radicals.

Hint 3Types of reaction and products.

Where students lose marks on this one
  • Writing an addition equation for hexane.

    Why it happens: Hexane has no C=C to add across.

    It must be substitution.

Written for this site.

Common mistake

Hexane + Br₂ → dibromohexane.

Why it happens: Students reuse the alkene addition equation.

An alkane has no π bond to add across. Carbon already has four bonds, so a hydrogen must leave: C₆H₁₄ + Br₂ → C₆H₁₃Br + HBr. Evidence for substitution is the misty HBr fumes, which turn moist blue litmus red.

What lifts this to a Band 6

For every reaction, state three things: the type (addition or substitution), the conditions (catalyst, UV, heat), and the product's name with its structure. If the alkene is unsymmetrical, name both products and say which is major.

Why Markovnikov's rule works

The first step of HX addition is the π electrons attacking H⁺, which leaves a positive carbon (a carbocation) on the other carbon. Alkyl groups push electron density toward a positive carbon and stabilise it. So the more stable secondary carbocation, CH₃C⁺HCH₃, forms faster than the primary one. X⁻ then bonds to that carbon, giving the Markovnikov product.

What bromine water really gives

In bromine water, water molecules far outnumber bromide ions. So the intermediate is often captured by water, giving a bromoalcohol such as 2-bromoethanol rather than 1,2-dibromoethane. For the HSC, 1,2-dibromoethane is the accepted answer. Either way, the colour disappears because Br₂ is used up.