HSC Study

Introduction to Vectors

What a vector is, the notations the examination uses, and how to add, subtract, scale, measure and point vectors in two dimensions, both as arrows and as components.

50 min · Vectors

The full teaching. Start here.

The short version

A vector has a magnitude and a direction. A scalar has magnitude only.

Handwritten vectors carry a tilde underneath, . You also see for the vector from to .

Every two dimensional vector can be written three ways:

where and are unit vectors along the positive and axes.

  • Add or subtract component by component. Geometrically, place the vectors head to tail.
  • Multiply by a scalar : multiply every component by . The length scales by , and a negative reverses the direction.
  • From to : , end minus start.
  • Magnitude: . So is the distance .
  • Unit vector: .
  • Direction: the angle from the positive axis. Sketch the vector first to get the quadrant right.

What a vector is

Vector

A quantity with both a magnitude and a direction, such as a displacement of km north-east or a velocity of m/s due south. A quantity with magnitude only, such as a distance, a speed, a mass or a time, is a scalar.

A vector is drawn as a directed line segment, an arrow. Its length represents the magnitude and its direction is the direction. An arrow can be moved anywhere without changing it. Two arrows with the same length and direction are the same vector, wherever they are drawn.

CheckpointAnswer before reading on.

Which of these quantities is a vector?

Select one answer

Hint 1A vector has a direction.

Hint 2Speed has no direction.

Hint 3Which one says where to?

Position vectors and displacement vectors

The fact that arrows can be moved is why there are two kinds of vector.

A position vector is tied to the origin. The position vector of the point is , and it tells you where is.

A displacement vector (or relative vector) joins any two points. tells you how to get from to , and it does not care where the origin is.

The two are linked by going from back to the origin and then out to :

End minus start. This one line is used in nearly every vectors question in the course.

CheckpointAnswer before reading on.

Points and have position vectors and relative to the origin . Which statement is correct?

Select one answer

Hint 1A position vector starts at .

Hint 2 starts at .

Hint 3Go from back to , then out to .

CheckpointAnswer before reading on.

Explain the difference between a position vector and a displacement vector. Use the points and to illustrate. (2 marks)

Hint 1Where does each start?

Hint 2.

Hint 3 is minus .

Notation and forms

In print a vector is bold, . Bold cannot be handwritten, so in your working it becomes , with a tilde underneath. An unmarked is a scalar, and a marker reads it that way. A plain can also mean the magnitude of , which is another reason to mark vectors every time.

CheckpointAnswer before reading on.

Why is a vector handwritten as , with a tilde underneath?

Select one answer

Hint 1Printed texts use bold.

Hint 2Bold cannot be handwritten.

Hint 3It marks the letter as a vector.

The unit vectors and have length and point along the positive and axes. They are perpendicular, and every two dimensional vector is a combination of them. The same vector can be written as components, as an ordered pair or as a column:

Use whichever form the question uses. Column vectors are often clearest for arithmetic, because each component sits in its own row.

CheckpointAnswer before reading on.

Which statement about and is correct?

Select one answer

Hint 1Both are unit vectors.

Hint 2They point along the axes.

Hint 3They are perpendicular.

CheckpointAnswer before reading on.

Which is the same vector as ?

Select one answer

Hint 1Top entry is horizontal.

Hint 2Horizontal goes with .

Hint 3Keep the signs.

CheckpointAnswer before reading on.

is the point and is the point . Which column vector is ?

Select one answer

Hint 1End minus start.

Hint 2 and .

Hint 3Check the signs twice.

Operations, as arrows and as components

aba + btriangle lawaba + ba − bparallelogram law
The triangle law puts vectors head to tail. The parallelogram law draws them from one point: one diagonal is the sum, and the other is the difference.

Addition. Geometrically, the triangle law: draw starting at the head of . The sum runs from the tail of to the head of . The parallelogram law is the same fact drawn from a common point: complete the parallelogram, and the diagonal from the common point is the sum. In components, add the matching components.

Subtraction. . In the parallelogram it is the other diagonal, running from the head of to the head of . In components, subtract the matching components.

Scalar multiplication. is parallel to and times as long. It points the same way if and the opposite way if . In components, multiply each one by .

CheckpointAnswer before reading on.

If and , find .

Select one answer

Hint 1Scale each vector first.

Hint 2.

Hint 3Subtract .

CheckpointAnswer before reading on.

How is the vector related to geometrically?

Select one answer

Hint 1The size of the scalar scales the length.

Hint 2The sign sets the direction.

Hint 3Negative reverses.

CheckpointAnswer before reading on.

Two vectors and are drawn from the same point. Which vector joins the tip of to the tip of ?

Select one answer

Hint 1Start at the tip of .

Hint 2Go back along , then out along .

Hint 3End minus start.

Worked example3 marks

Expressing vectors in a figure

is a parallelogram with and . is the midpoint of , and is the point on with . Express , and in terms of and .

Use equal opposite sides

Equal vectors are the key fact in any parallelogram question. Opposite sides have the same length and the same direction.

In the parallelogram , and .

Diagonal by the triangle law

Follow any path along known vectors from O to B.

A path to M

M is half way along AB, and AB is a known vector, so a half of it is a scalar multiple.

since .

A ratio along a line

A ratio of 2 to 1 splits OB into three equal parts, and N is two of them from O.

Answer

, , .

Is that answer sensible?

Go the long way round to : . Two different paths give the same vector, as they must.

CheckpointAnswer before reading on.

In triangle , and . is the midpoint of . Find .

Select one answer

Hint 1Go from to , then half way along .

Hint 2.

Hint 3Simplify.

CheckpointAnswer before reading on.

is a parallelogram with and . Express the diagonals and in terms of and . (2 marks)

Hint 1 equals .

Hint 2The long diagonal is the sum.

Hint 3The other diagonal is a difference.

CheckpointAnswer before reading on.

lies on with . Given and , express in terms of and . (2 marks)

Hint 1 is a quarter of the way from to .

Hint 2.

Hint 3Simplify.

Two vectors are equal exactly when their components are equal, so one vector equation in two dimensions is really two equations.

CheckpointAnswer before reading on.

Find and if . (2 marks)

Hint 1Equal vectors have equal components.

Hint 2.

Hint 3.

CheckpointAnswer before reading on.

Find the value of such that is parallel to the axis.

Hint 1Parallel to the axis means no component.

Hint 2The component is .

Hint 3Set it to zero.

Magnitude, and why the formula holds

Worked example2 marks

Proving the magnitude formula

Prove that the magnitude of is .

Place the vector at the origin

Vectors can be moved freely, so put the tail at O. The head is then at the point (x, y).

Represent by , where is . Let be , the foot of the perpendicular from to the axis.

Identify a right triangle

The magnitude is a length, and lengths in a right triangle come from Pythagoras.

Triangle has a right angle at , with and . The magnitude is the length of the hypotenuse .

Apply Pythagoras

Squaring removes the absolute value signs, and a length is never negative, so take the positive root.

Answer

, as required. (If or is zero the triangle collapses, but the result still holds directly.)

Is that answer sensible?

, the familiar , , triangle.

CheckpointAnswer before reading on.

Find .

Hint 1Pythagoras.

Hint 2.

Hint 3.

CheckpointAnswer before reading on.

Prove that . (2 marks)

Hint 1Draw the vector from the origin.

Hint 2Its components form a right triangle.

Hint 3Apply Pythagoras.

Because is the arrow from to , its magnitude is the distance between the two points. The distance formula from earlier years is this fact written in coordinates.

CheckpointAnswer before reading on.

is and is . Find , the distance from to .

Hint 1.

Hint 2Magnitude.

Hint 3.

Unit vectors

A unit vector has magnitude . It carries a direction and nothing else. Dividing any non-zero vector by its own length gives the unit vector in its direction:

Worked example2 marks

Unit vector, then any length you want

Find the unit vector in the direction of , and hence a vector of length in the same direction.

Magnitude

The unit vector is the vector divided by this.

.

Divide

Dividing by the length rescales to length 1 without changing direction.

Scale to the new length

A unit vector times 26 has length 26. This is the standard use of a unit vector.

Answer

, and the vector of length is .

Is that answer sensible?

. And .

CheckpointAnswer before reading on.

Find the unit vector in the direction of .

Select one answer

Hint 1Find .

Hint 2.

Hint 3Divide each component.

CheckpointAnswer before reading on.

Find a vector of magnitude in the direction of . (2 marks)

Hint 1Make a unit vector first.

Hint 2.

Hint 3Multiply the unit vector by 15.

Direction

The direction of a vector is usually given as the angle it makes with the positive axis, measured anticlockwise. Then

Going the other way, , but a calculator's only returns angles between and . It cannot tell from .

Common mistake

Taking the direction of −2i + 2j as tan⁻¹(−1) = −45°.

Why it happens: The calculator's answer is accepted without a sketch.

Sketch the vector first and find the quadrant. Then use the calculator only for the reference angle, , and place it in the quadrant: second quadrant, so .

CheckpointAnswer before reading on.

Find the angle, in degrees, that makes with the positive axis, measured anticlockwise.

Hint 1Sketch it first: which quadrant?

Hint 2 of gives .

Hint 3Second quadrant.

CheckpointAnswer before reading on.

A vector has magnitude and direction anticlockwise from the positive axis. Write it in component form.

Select one answer

Hint 1.

Hint 2.

Hint 3.

In navigation questions directions are bearings, measured clockwise from north. A bearing of is an angle of anticlockwise from east (add if that is negative).

Exam question

Harder · about 5 min

3 marks

A hiker walks km due east, then km on a bearing of . Taking as east and as north, find the hiker’s displacement from the start as a vector, and its magnitude to one decimal place. (3 marks)

Hint 1A bearing of is from east.

Hint 2Second leg: .

Hint 3Add the two legs.

Where students lose marks on this one
  • Using $30°$ from east.

    Why it happens: Bearings are measured from north.

    Convert: angle from east bearing.

Written for this site.

Why the components are unique

Any vector in the plane can be written as in exactly one way. The reason is that and are not parallel. If , then . A multiple of can equal a multiple of only if both multiples are zero.

The same argument works for any two non-parallel vectors and , not only and . If , then and . That is the fact that powers the harder geometric proofs later in this topic. You write the same vector two ways, one along each of two paths, and then equate the coefficients of and of .