HSC Study

Regions and Loci

Sketching and describing subsets of the complex plane given by relations involving modulus, argument, real and imaginary parts, including circles, perpendicular bisectors, rays, wedges and Apollonius circles, and finding greatest and least values on a locus.

55 min · Complex Numbers

Assumes you have read Geometry of Complex Operations.

The full teaching. Start here.

The short version

  • is the distance from to . So is a circle with centre and radius ; is the inside, the outside.
  • is the perpendicular bisector of the segment from to .
  • is a ray from in direction , with the point excluded. Two such conditions give a wedge.
  • , and become , and . When the shape isn't obvious, substitute .
  • with is a circle (an Apollonius circle): square, expand and complete the square.
  • Boundaries: use a solid line for or and a dashed line for ; mark an excluded point with an open circle.

Circles and perpendicular bisectors

Think of as a distance, and most loci can be drawn without algebra. Rewrite the expression so that it is minus something before reading off a centre: is the distance to .

Worked example3 marks

A disc and a bisector

(a) Describe the region .

(b) Find the Cartesian equation of .

(a) Rewrite as a distance

|z − 2 + i| = |z − (2 − i)|.

The points at distance at most from : the closed disc with centre and radius , boundary included.

(b) Square both sides

Distances squared remove the square roots.

.

(b) Expand and cancel

The x² and y² terms cancel, leaving a line.

, so .

Answer

(a) The disc with centre and radius , including its boundary.

(b) , the perpendicular bisector of the segment from to .

Is that answer sensible?

The midpoint of and is , and , so it lies on the line.

CheckpointAnswer before reading on.

The locus is a circle with

Select one answer

Hint 1Write it as .

Hint 2 is the distance from to .

Hint 3Centre a, radius 4.

CheckpointAnswer before reading on.

Which describes the region ?

Select one answer

Hint 1.

Hint 2Strict inequality.

Hint 3Points closer than 2 to −i.

CheckpointAnswer before reading on.

For distinct complex numbers and , the locus is

Select one answer

Hint 1z is the same distance from a and from b.

Hint 2Which line is equidistant from two points?

Hint 3It is perpendicular to the segment joining them.

CheckpointAnswer before reading on.

The locus is

Select one answer

Hint 1Perpendicular bisector of 1 and −1.

Hint 2The midpoint is 0.

Hint 3The segment lies along the real axis.

CheckpointAnswer before reading on.

Which point lies in the region and ?

Select one answer

Hint 1Test both conditions for each option.

Hint 2 is the distance to .

Hint 3Im must be strictly more than 1.

CheckpointAnswer before reading on.

Which pair of conditions describes the points inside or on the circle with centre and radius , and strictly to the right of the line ?

Select one answer

Hint 1Inside or on means ≤.

Hint 2Strictly right means >.

Hint 3Centre : .

Exam question

Standard · about 3 min

2 marks

Find the Cartesian equation of the locus .

Hint 1Let and square both sides.

Hint 2.

Hint 3Expand and cancel the squares.

Where students lose marks on this one
  • Writing (y − 4)² on the right.

    Why it happens: Sign error in |z + 4i|.

    z + 4i = x + i(y + 4).

Written for this site.

Exam question

Standard · about 3 min

2 marks

Find the points where the circles and intersect.

Hint 1 and .

Hint 2Subtract to find x.

Hint 3.

Where students lose marks on this one
  • Giving only 1 + √3 i.

    Why it happens: Taking only the positive square root.

    y² = 3 gives two values.

Written for this site.

Rays and wedges

is the direction from to . Fixing it gives a ray starting at , never a whole line: the opposite half of the line has an argument that differs by . The starting point is always excluded, because is undefined.

Worked example2 marks

A wedge with a mixed boundary

Sketch the region .

Vertex

The argument is measured from 1.

The vertex is , and it is excluded.

Boundaries

Strict inequality gives a dashed ray; ≤ gives a solid one.

The ray from at angle is dashed (excluded). The ray at angle is solid (included).

Answer

The wedge between the two rays, turning anticlockwise from to , as shown below.

ReIm1excludedincluded
The region . The vertex is excluded (open circle), the ray is excluded (dashed) and the ray is included (solid).

CheckpointAnswer before reading on.

The locus is

Select one answer

Hint 1A ray starting at 2i.

Hint 2The starting point itself has no argument.

Hint 3Direction π/4 means slope 1.

CheckpointAnswer before reading on.

Which describes the region ?

Select one answer

Hint 1.

Hint 2The boundary is y = x.

Hint 3Test a point such as 1.

Exam question

Standard · about 3 min

2 marks

Describe the region .

Hint 1Vertex at .

Hint 2Boundary rays at ±π/4.

Hint 3The vertex itself is excluded.

Where students lose marks on this one
  • Putting the vertex at 1.

    Why it happens: Sign error with z + 1.

    z + 1 = z − (−1), so the vertex is −1.

Written for this site.

Exam question

Standard · about 3 min

2 marks

Find the area of the region and .

Hint 1It is a sector.

Hint 2Area .

Hint 3, .

Where students lose marks on this one
  • Answering 4π/3.

    Why it happens: Forgetting the half in the sector formula.

    Area = ½r²θ.

Written for this site.

Common mistake

Arg(z − 2i) = π/4 is the line y = x + 2.

Why it happens: An argument fixes a direction from 2i, so it gives a ray, not a whole line.

Only the half with is included, and the point itself is excluded. Draw it with an open circle at the start.

Combine the two loci from this section below. Move the circle and turn the ray to see when they meet in two points, one point (a tangent) or none. The starting point of the ray is not part of the locus.

Where a ray meets a circleA circle of radius 2 centred at 1 + 1i and a ray from -3 + 0i at 20° to the real axis. They meet in 2 points.-6-4-20246-6-4-20246ReIm
  • |z − z₁| = r
  • arg(z − z₂) = θ
The ray starts at z₂ but does not include it, so it is drawn with an open circle there. Turn it and watch the number of intersection points change from two to one (a tangent) to none.
1.0
1.0
2.0
-3.0
0.0
20 °
Points of intersection
2
Point 1
-0.982 + 0.734i
Point 2
2.689 + 2.071i

Every slider is a normal range input, so the arrow keys move it one step and Home and End jump to the extremes.

Converting to Cartesian form

When a relation is not a standard shape, substitute and simplify. Useful facts: , , and . The most common exam case is , which gives a circle when .

Worked example3 marks

An Apollonius circle

Show that is a circle, and find its centre and radius.

Square

Remember to square the factor 2 as well.

.

Expand and collect

Everything to one side.

, so and .

Complete the square

Read off centre and radius.

.

Answer

The circle with centre and radius .

Is that answer sensible?

: ✓. : ✓. Both are on the circle.

ReIm−21centre 24
The locus : every point on the circle is twice as far from as from .

CheckpointAnswer before reading on.

The locus is

Select one answer

Hint 1.

Hint 2.

Hint 3What curve is that?

Exam question

Standard · about 3 min

2 marks

Find the Cartesian equation of and describe the locus.

Hint 1.

Hint 2.

Hint 3Complete the square.

Where students lose marks on this one
  • Writing z + z̄ = 2iy.

    Why it happens: Mixing up the sum and difference.

    z + z̄ = 2Re(z) = 2x.

Written for this site.

Exam question

Harder · about 4 min

3 marks

Show that the locus is a circle, and find its centre and radius.

Hint 1Square: .

Hint 2Collect terms and divide by 3.

Hint 3Complete the square in x.

Where students lose marks on this one
  • Squaring the 2 as 2 instead of 4.

    Why it happens: Forgetting that the factor is squared too.

    (2|z|)² = 4|z|².

Written for this site.

Exam question

Hardest asked · about 5 min

3 marks

Find the centre and radius of the circle .

Hint 1.

Hint 2.

Hint 3Divide by 3 and complete the squares.

Where students lose marks on this one
  • Forgetting to subtract the constant 1 when completing the square.

    Why it happens: Leaving the +1 on the left.

    Move the constant across before reading off r².

Written for this site.

Exam question

Hardest asked · about 5 min

3 marks

Show that the locus is a circle with one point removed, and describe it.

Hint 1.

Hint 2.

Hint 3.

Where students lose marks on this one
  • Leaving the origin in.

    Why it happens: The origin satisfies the Cartesian equation but not the original.

    1/z is undefined at z = 0.

Written for this site.

Exam question

Harder · about 4 min

3 marks

Find the Cartesian equation of the locus , and name the curve.

Hint 1.

Hint 2Square both sides, noting y ≥ 0.

Hint 3Distance to a point equals distance to a line.

Where students lose marks on this one
  • Stopping at a line.

    Why it happens: Cancelling y² but forgetting the −2y term.

    Expand (y − 1)² fully.

Written for this site.

Exam question

Hardest asked · about 2 min

1 mark

The locus is

Select one answer

Hint 1The angle at z between the vectors to −1 and to 1 is a right angle.

Hint 2Angle in a semicircle.

Hint 3Test z = i.

Where students lose marks on this one
  • Choosing the whole circle.

    Why it happens: The lower half gives argument −π/2.

    Test a point on each half.

Written for this site.

Greatest and least values on a locus

Once the locus is drawn, extreme values are geometry. For on a circle with centre and radius :

  • the greatest and least values of are and , on the line through and the centre;
  • the greatest and least values of (when is outside the circle) occur at the tangents from , where the radius meets the tangent at a right angle.

For a line, the least value of is the perpendicular distance from .

Exam question

Standard · about 2 min

1 mark

lies on the circle . Find the greatest value of .

Hint 1The centre is 3 + 4i.

Hint 2.

Hint 3Add the radius.

Where students lose marks on this one
  • Answering 5.

    Why it happens: Giving the distance to the centre.

    Add the radius.

Written for this site.

Exam question

Standard · about 2 min

1 mark

lies on the circle . Find the least value of .

Hint 1.

Hint 2The origin is outside the circle.

Hint 3Subtract the radius.

Where students lose marks on this one
  • Answering 0.

    Why it happens: Assuming the circle passes near the origin.

    Compare the distance 5 with the radius 2.

Written for this site.

Exam question

Harder · about 4 min

2 marks

lies on the circle . Find the greatest value of , in radians.

Hint 1Draw the tangents from O.

Hint 2The tangent makes angle with the imaginary axis, where .

Hint 3.

Where students lose marks on this one
  • Using tan α = 1/2.

    Why it happens: Treating the tangent triangle as having the radius and the centre distance as legs.

    The distance to the centre is the hypotenuse, so use sine.

Written for this site.

Exam question

Standard · about 3 min

2 marks

satisfies . Find the least value of . Give your answer correct to three decimal places.

Hint 1The locus is the line x + y = 4.

Hint 2The least |z| is the perpendicular distance from O.

Hint 3.

Where students lose marks on this one
  • Answering 4.

    Why it happens: Using the distance to an intercept.

    The nearest point is the foot of the perpendicular, 2 + 2i.

Written for this site.

What lifts this to a Band 6

On sketches, markers check three things: the correct centre or vertex labelled with its coordinates, the correct boundary style (solid, dashed, open circle), and the correct side shaded. Test one point in the region you shaded to confirm it satisfies every condition. For a maximum argument, always draw the tangent and the radius and mark the right angle: the triangle is the working.

Why |z − a| = k|z − b| is always a circle

For , the points with form a circle, named after Apollonius of Perga. Its centre lies on the line , and it cuts that line at the two points dividing internally and externally in the ratio . In the worked example those points are and : divides the segment from to in the ratio , and divides it externally in the same ratio.

When the circle becomes infinitely large, and the locus is the perpendicular bisector. So a straight line is the limiting case of an Apollonius circle, which is one reason complex analysis often treats lines as circles through the point at infinity.