HSC Study

Resisted Projectile Motion

Projectiles in a medium with resistance proportional to velocity, solving the horizontal and vertical equations separately, finding the highest point, the Cartesian path, the time of flight and range, and the complete up-and-down motion of a particle thrown vertically.

60 min · Mechanics

Assumes you have read Resisted Vertical Motion and Projectiles in Cartesian Form.

The full teaching. Start here.

The short version

  • Equations of motion: for resistance , resolve into components: and .
  • Solve each separately:
    • and .
    • .
  • Highest point: .
  • Landing: , which usually has to be solved numerically.
  • Long-run behaviour: , a vertical asymptote, and the velocity tends to .
  • Shape: the path is lopsided, with a steeper descent, and it is shorter and lower than the unresisted parabola.

Setting up and solving

For resistance proportional to velocity, each component of the resistance depends only on its own velocity component. That decouples the equations: the horizontal motion is resisted horizontal motion, and the vertical motion is resisted vertical motion, both from the earlier lessons.

Worked example5 marks

The highest point

A particle is projected from the origin at m/s at with and . Find and in terms of , and the position of the highest point.

Horizontal

ẋ(0) = 50 cos 30° = 25√3.

, so .

Vertical

dẏ/dt = −(ẏ + 50)/5 with ẏ(0) = 25.

, so .

Time of the top

ẏ = 0.

, so s.

Position

1 − e^{−t/5} = 1/3.

m and m.

Answer

The highest point is at about , reached after s. Without resistance, it would be at about after s.

CheckpointAnswer before reading on.

A projectile of mass moves through air with resistance acting opposite to its velocity. With upwards, its equations of motion are

Select one answer

Hint 1Resolve the resistance into components.

Hint 2The horizontal component is .

Hint 3Gravity only acts vertically.

CheckpointAnswer before reading on.

Why can a projectile with resistance be solved one component at a time, but one with resistance generally cannot?

Select one answer

Hint 1For , the horizontal component is .

Hint 2That involves both components.

Hint 3The equations become coupled.

Exam question

Straightforward · about 3 min

2 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Show that .

Hint 1.

Hint 2.

Hint 3 at .

Where students lose marks on this one
  • Using 40 as the initial horizontal velocity.

    Why it happens: Only the component 40 cos θ is horizontal.

    40 × 4/5 = 32.

Written for this site.

Exam question

Straightforward · about 3 min

2 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Given , show that .

Hint 1Integrate .

Hint 2.

Hint 3 at .

Where students lose marks on this one
  • Integrating e^{−t/2} to −(1/2)e^{−t/2}.

    Why it happens: You divide by the coefficient −1/2.

    ∫ e^{−t/2} dt = −2e^{−t/2}.

Written for this site.

Exam question

Straightforward · about 1 min

1 mark

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Given , what horizontal distance could the particle never exceed, even if the ground were not there?

Hint 1Let .

Hint 2.

Hint 3.

Where students lose marks on this one
  • Saying there is no limit.

    Why it happens: The horizontal velocity decays exponentially.

    Take the limit of x(t).

Written for this site.

Exam question

Standard · about 3 min

2 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Show that .

Hint 1.

Hint 2.

Hint 3 at .

Where students lose marks on this one
  • Starting from ẏ = 40.

    Why it happens: The vertical component is 40 sin θ = 24.

    Resolve the launch velocity.

Written for this site.

Exam question

Standard · about 3 min

2 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Given , show that .

Hint 1Integrate term by term.

Hint 2.

Hint 3 at gives .

Where students lose marks on this one
  • Forgetting the −20t term.

    Why it happens: The constant −20 integrates to −20t.

    Integrate every term.

Written for this site.

Exam question

Standard · about 3 min

2 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Given , find the time taken to reach maximum height, correct to decimal places.

Hint 1Set .

Hint 2.

Hint 3.

Where students lose marks on this one
  • Setting ẋ = 0.

    Why it happens: At the top the vertical velocity is zero.

    Only ẏ vanishes there.

Written for this site.

Exam question

Standard · about 4 min

3 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Given and that the top is reached when , find the maximum height, correct to decimal places.

Hint 1.

Hint 2.

Hint 3.

Where students lose marks on this one
  • Substituting t = 1.577 into only the exponential term.

    Why it happens: The −20t term needs it too.

    Substitute into both terms.

Written for this site.

Exam question

Standard · about 3 min

2 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Given and that the top is reached when , find the horizontal distance to the highest point, correct to decimal places.

Hint 1.

Hint 2.

Hint 3Evaluate.

Where students lose marks on this one
  • Doubling to get the range.

    Why it happens: The resisted path is not symmetric.

    Only the distance to the top is asked.

Written for this site.

Exam question

Harder · about 5 min

3 marks

A particle is projected at speed and angle with and . Show that its highest point is at horizontal distance .

Hint 1.

Hint 2At the top, .

Hint 3.

Where students lose marks on this one
  • Using the unresisted time V sin θ/g.

    Why it happens: The resisted time is shorter.

    Solve ẏ = 0 from the resisted equation.

Written for this site.

Exam question

Harder · about 5 min

3 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Using and , show that the path is .

Hint 1.

Hint 2.

Hint 3Substitute both into y.

Where students lose marks on this one
  • Getting the sign of the log term wrong.

    Why it happens: ln(1 − x/64) is negative, which pulls y down.

    Check that −20t = 40 ln(1 − x/64).

Written for this site.

CheckpointAnswer before reading on.

The resisted time to the top is . As , this tends to

Select one answer

Hint 1 for small .

Hint 2.

Hint 3Compare with the unresisted case.

Landing and the shape of the path

Setting gives an equation mixing and , which has no algebraic solution. Solve it with a calculator or by testing values. There is a trick for the range, though: the landing equation gives in terms of , which you can substitute straight into .

Worked example3 marks

Time of flight and range

For the particle in the previous example, find the time of flight and the range.

Landing equation

y = 0 with t > 0.

. Numerically, s.

Range

Use 1 − e^{−T/5} = 50T/375 = 2T/15.

m.

Answer

s and the range is about m, compared with s and m without resistance.

Is that answer sensible?

The top was reached at s, so the descent takes about s, longer than the ascent, as expected.

xy5464153.6no resistanceresisted
Launched at m/s with . The dashed path has no resistance. The solid path has and . It peaks early, falls steeply and lands at about m, bending towards the asymptote .

CheckpointAnswer before reading on.

Compared with the unresisted parabola, the path of a projectile with linear resistance

Select one answer

Hint 1Compare distances before and after the top.

Hint 2Horizontal speed keeps falling.

Hint 3The descent is steeper.

CheckpointAnswer before reading on.

For and , as the velocity tends to

Select one answer

Hint 1.

Hint 2.

Hint 3Terminal velocity.

Exam question

Harder · about 5 min

3 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . Given , find the time of flight on horizontal ground, correct to decimal places.

Hint 1Solve for .

Hint 2Use a calculator or a numerical method.

Hint 3The answer is between and .

Where students lose marks on this one
  • Doubling the time to the top, 2 × 1.577.

    Why it happens: The descent takes longer than the ascent.

    Solve y = 0 directly.

Written for this site.

Exam question

Harder · about 3 min

2 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . The time of flight satisfies , and . Find the range, correct to decimal place.

Hint 1.

Hint 2From the equation, .

Hint 3.

Where students lose marks on this one
  • Using the unresisted range V² sin 2θ/g = 153.6.

    Why it happens: Resistance cuts the range a lot.

    Use the resisted x(t).

Written for this site.

Exam question

Hardest asked · about 5 min

3 marks

A particle is projected from the origin at m/s at angle above the horizontal, where and . Air resistance is times the velocity per unit mass, so and . It lands at s. Using and , find the angle below the horizontal at which it hits the ground, in degrees correct to decimal place.

Hint 1.

Hint 2 and .

Hint 3.

Where students lose marks on this one
  • Answering the launch angle, 36.9°.

    Why it happens: Only an unresisted path lands at the launch angle.

    Use the velocity components at landing.

Written for this site.

Common mistake

The highest point is halfway along, so the range is twice the x-coordinate of the top.

Why it happens: Symmetry comes from constant horizontal velocity, which resistance destroys.

With resistance, the horizontal speed keeps dropping, so less ground is covered after the top than before it. Always find the landing point from .

Change the speed, angle and below and compare the two paths. Look for the best angle with resistance: it is below , and it drops further as increases.

A projectile with and without air resistanceLaunched at 30 metres per second and 45 degrees with k = 0.2, the projectile lands 56.2 metres away, compared with 90.0 metres without resistance.01020304050607080900510152025horizontal distance (m)height (m)
  • no resistance
  • resistance proportional to velocity
With resistance the horizontal velocity decays, so the path can never pass the vertical asymptote x = (u cos θ)/k. Notice that the best launch angle with resistance is less than 45°.
30 m s⁻¹
45 °
0.20 s⁻¹
Range
56.2 m (without resistance 90.0 m)
Greatest height
17.7 m (without resistance 22.5 m)
Time of flight
3.77 s (without resistance 4.24 s)
Horizontal limit (u cos θ)/k
106.1 m

Every slider is a normal range input, so the arrow keys move it one step and Home and End jump to the extremes.

The complete vertical motion

For a particle thrown straight up with linear resistance, one equation, , is valid for the whole flight, because changes sign when does. So a single expression for in terms of covers both the rise and the fall. This is not true for resistance, where you must switch equations at the top.

Exam question

Standard · about 3 min

2 marks

A particle is projected vertically upwards at m/s with (upwards positive). Find the time to reach maximum height, correct to decimal places.

Hint 1.

Hint 2Set .

Hint 3.

Where students lose marks on this one
  • Answering 5 s, as without resistance.

    Why it happens: Resistance shortens the rise.

    Use the resisted velocity.

Written for this site.

Exam question

Standard · about 4 min

2 marks

A particle is projected vertically upwards at m/s with (upwards positive). Find the maximum height, correct to decimal places.

Hint 1.

Hint 2, , .

Hint 3.

Where students lose marks on this one
  • Using u²/(2g) = 125.

    Why it happens: That ignores resistance.

    Use v dv/dy or the resisted formula.

Written for this site.

Exam question

Harder · about 5 min

3 marks

A particle is projected vertically upwards at m/s with (upwards positive). For linear resistance the same equation holds on the way down, so for the whole flight. Find the total time before it returns to its starting height, correct to decimal places.

Hint 1Solve for .

Hint 2Use a numerical method.

Hint 3It is a little under 10 s.

Where students lose marks on this one
  • Doubling the rise time to get 8.11 s.

    Why it happens: The fall takes longer.

    Solve y = 0 directly.

Written for this site.

Exam question

Harder · about 3 min

2 marks

A particle is projected vertically upwards at m/s with (upwards positive). It returns to its starting height after s. Using , find its speed then, correct to decimal place.

Hint 1.

Hint 2.

Hint 3Speed is the magnitude.

Where students lose marks on this one
  • Giving −37.4.

    Why it happens: Speed is a magnitude.

    Drop the sign.

Written for this site.

What lifts this to a Band 6

Final questions on this topic often end with a "show that" about the landing time, or a comparison with the unresisted case. Keep your expressions exact, such as and , for as long as possible. Substitute numbers only at the end. It also helps to check that each formula reduces to the familiar unresisted one as .

Quadratic resistance and the limits of exact solutions

With resistance , the components are and , with . The equations are coupled, and there is no closed-form solution for the path. In practice they are solved numerically, which is how ballistics and sports trajectories are computed.

Some special cases do have exact solutions:

  • purely vertical motion, which you have already solved;
  • motion along the path, using the angle of the velocity as the variable, which gives an exact relation between the speed and .

Linear resistance is the realistic model for small, slow objects, such as dust in air or particles in a liquid. Quadratic resistance fits balls and cars at everyday speeds.