HSC Study

Vectors in Three Dimensions

Notation for vectors in three dimensions, the unit vectors i, j and k, operations done algebraically and geometrically, deriving and using the magnitude formula, unit vectors, and Cartesian coordinates in space.

45 min · Vectors

Assumes you have read Introduction to Vectors.

The full teaching. Start here.

The short version

  • , and are unit vectors along the positive , and axes.
  • .
  • Add, subtract and scale component by component, exactly as in two dimensions.
  • (end minus start).
  • . The distance is .
  • . A vector of length in the direction of is .
  • Parallel: one vector is a scalar multiple of the other. Collinear points: parallel vectors that share a point.

Coordinates and notation in three dimensions

Space needs three perpendicular axes. By convention they are right-handed: curl the fingers of your right hand from the positive -axis towards the positive -axis, and your thumb points along the positive -axis. The coordinate planes are the -plane (), the -plane () and the -plane ().

Standard unit vectors

, and : vectors of length along the positive , and axes. Every 3D vector is a combination .

The same vector can be written three ways, all of them acceptable:

CheckpointAnswer before reading on.

What is ?

Select one answer

Hint 1Three unit vectors.

Hint 2One per axis.

Hint 3z-axis.

CheckpointAnswer before reading on.

Which is the same vector as ?

Select one answer

Hint 1Read components in order.

Hint 2x, y, z.

Hint 3Column vector top to bottom.

CheckpointAnswer before reading on.

In which coordinate plane does the point lie?

Select one answer

Hint 1Which coordinate is zero?

Hint 2y = 0.

Hint 3Contains the x- and z-axes.

CheckpointAnswer before reading on.

Which is in column form for and ?

Select one answer

Hint 1End minus start.

Hint 2.

Hint 3.

Operations

Everything from two dimensions carries over, with one more component.

  • Addition : place the vectors head to tail (triangle law), or use the diagonal of the parallelogram they form.
  • Subtraction . In particular, .
  • Scalar multiple : parallel to and times as long, reversed if .

Worked example4 marks

Operations and their geometric meaning

, and are three vertices of parallelogram . (a) Find and . (b) Find . (c) Find the midpoint of , and verify that it is also the midpoint of .

(a) End minus start

Displacement vectors.

, .

(b) Opposite sides are equal vectors

In ABCD, AD is parallel and equal to BC.

.

(c) Midpoints

The midpoint is the average of the position vectors.

and .

Answer

(a) and . (b) . (c) is the midpoint of both diagonals.

Is that answer sensible?

The diagonals of a parallelogram bisect each other, so the two midpoints must agree, and they do.

CheckpointAnswer before reading on.

Given and , find .

Hint 1Scale each.

Hint 2.

Hint 3Subtract components.

CheckpointAnswer before reading on.

Geometrically, how does compare with ?

Select one answer

Hint 1Scalar multiple.

Hint 2Negative reverses.

Hint 3Length doubles.

CheckpointAnswer before reading on.

Which vector is parallel to ?

Select one answer

Hint 1Scalar multiple.

Hint 2Check ratios.

Hint 3Multiply by .

CheckpointAnswer before reading on.

Simplify .

Select one answer

Hint 1Head to tail.

Hint 2.

Hint 3Zero vector.

CheckpointAnswer before reading on.

Find the -coordinate of the midpoint of and .

Hint 1.

Hint 2.

Hint 35.

Exam question

Standard · about 3 min

2 marks

is a parallelogram with , and . Find .

Hint 1.

Hint 2.

Hint 3Compute.

Where students lose marks on this one
  • Using AD = CB.

    Why it happens: Reversed direction.

    Go round the parallelogram in order.

Written for this site.

Exam question

Standard · about 3 min

2 marks

Find the point dividing internally in the ratio , where and .

Hint 1.

Hint 2.

Hint 3Add to A.

Where students lose marks on this one
  • Using 2/1 of AB.

    Why it happens: Ratio misread.

    AP is 2 parts out of 3.

Written for this site.

Exam question

Standard · about 3 min

2 marks

Show that , and are collinear.

Hint 1 and .

Hint 2Scalar multiple?

Hint 3Common point A.

Where students lose marks on this one
  • Not mentioning the common point.

    Why it happens: Parallel alone is not enough.

    Parallel lines could be distinct.

Written for this site.

Common mistake

AB and BC are parallel, so A, B and C are collinear. (Or: AB and CD are parallel, so A, B, C, D are collinear.)

Why it happens: Parallel vectors give parallel lines, which need not be the same line.

For collinearity you need parallel vectors and a shared point. works because both vectors start at . says only that the lines and are parallel.

Magnitude

xyzOQP(x, y, z)z
Pythagoras twice. lies directly below . In the -plane, . The segment is vertical with length , so triangle has a right angle at , and .

Worked example4 marks

Deriving and using the magnitude formula

(a) Prove that . (b) Find the distance between and .

(a) Base of the box

Pythagoras in the xy-plane.

Let and . The right triangle with legs and gives .

(a) Up to P

QP is perpendicular to the xy-plane, so it is perpendicular to OQ.

, so .

(b) Displacement

Distance is the magnitude of AB.

, so .

Answer

(a) Proved using Pythagoras twice. (b) .

Is that answer sensible?

When the formula reduces to the familiar in the plane.

CheckpointAnswer before reading on.

Find .

Hint 1.

Hint 2.

Hint 33.

CheckpointAnswer before reading on.

How far is the point from the origin?

Hint 1.

Hint 2.

Hint 33.

CheckpointAnswer before reading on.

Find the distance between and .

Hint 1.

Hint 2.

Hint 313.

CheckpointAnswer before reading on.

If , what is ?

Select one answer

Hint 1.

Hint 2|−3| = 3.

Hint 315.

CheckpointAnswer before reading on.

The vector has magnitude . Find the possible values of .

Hint 1.

Hint 2.

Hint 3Two values.

Exam question

Standard · about 4 min

3 marks

Prove that .

Hint 1Box with P at a corner.

Hint 2Pythagoras in the base.

Hint 3Pythagoras again vertically.

Where students lose marks on this one
  • Adding x + y + z and squaring.

    Why it happens: Wrong formula.

    Use Pythagoras twice.

Written for this site.

Exam question

Standard · about 4 min

3 marks

Show that the triangle with vertices , and is equilateral.

Hint 1Find the three side vectors.

Hint 2Each has magnitude √2.

Hint 3All equal.

Where students lose marks on this one
  • Checking only two sides.

    Why it happens: Incomplete.

    All three sides must be equal.

Written for this site.

Exam question

Standard · about 3 min

2 marks

Given and , find to 2 decimal places.

Hint 1.

Hint 2.

Hint 3.

Where students lose marks on this one
  • Answering 8.

    Why it happens: Adding magnitudes.

    |a + b| ≠ |a| + |b| in general.

Written for this site.

Unit vectors

Dividing a non-zero vector by its length gives a vector of length in the same direction:

To get a vector of any length in that direction, multiply: .

Worked example3 marks

Unit vectors and vectors of given length

Let . Find (a) ; (b) a vector of length in the direction opposite to .

(a) Magnitude

Divide by it.

, so .

(b) Scale and reverse

Multiply the unit vector by −10.

.

Answer

(a) . (b) .

Is that answer sensible?

, as a unit vector should be.

CheckpointAnswer before reading on.

Find the unit vector in the direction of .

Hint 1.

Hint 2Divide each component.

Hint 3.

Exam question

Standard · about 3 min

2 marks

Find a vector of length in the same direction as .

Hint 1Unit vector first.

Hint 2.

Hint 3Multiply by 10.

Where students lose marks on this one
  • Multiplying (1, 2, 2) by 10.

    Why it happens: Skipping the unit vector.

    (10, 20, 20) has length 30.

Written for this site.

Exam question

Standard · about 3 min

2 marks

Find all values of for which .

Hint 1.

Hint 2.

Hint 3Two signs.

Where students lose marks on this one
  • Writing t√3 = 6 only.

    Why it happens: Forgetting the modulus.

    |t u| = |t||u|.

Written for this site.

What lifts this to a Band 6

Write every displacement as "end minus start" on its own line before using it, such as . Most lost marks in 3D questions come from sign slips in this step, which then carry through every later part.

Linear independence

Any vector in space is a unique combination of , and . The same is true for any three vectors that do not lie in a common plane. For example, , and also work: solving always has exactly one solution. Such a set is called a basis. This is why three numbers are enough to describe any point in space, and why two vectors can never fill it.