HSC Study

Australia's Trade Agreements

Australia's bilateral and multilateral trade agreements, with two worked examples of each, ANZCERTA and ChAFTA, the WTO and the CPTPP, and AANZFTA as a third multilateral example, plus the newer agreements built to diversify Australia's markets.

35 min · HSC Topic Two - Australia's Place in the Global Economy

Assumes you have read Australia's Trade Policy and Multilateral and Bilateral Agreements.

The full teaching. Start here.

The short version

  • Trade agreements are the second half of Australia's move to free trade: cutting its own barriers (previous lesson) and negotiating lower barriers abroad.
  • Bilateral agreements are between two countries. They are the easiest to negotiate but deliver narrower gains and add to a "noodle bowl" of overlapping rules.
    • ANZCERTA (1983) with New Zealand: all tariffs and quotas on goods gone by 1990, plus mutual recognition of standards and occupations. Australia's deepest agreement.
    • ChAFTA (2015) with China: removed most Chinese tariffs on Australian exports. China took 29 per cent of Australia's exports in 2024-25, but the agreement did not stop China's trade restrictions of 2020 to 2024.
  • Multilateral agreements are among many countries.
    • The WTO (166 members): Australia's trade rests on its most favoured nation rules, and Australia used its dispute process to get China's barley and wine duties removed in 2023 and 2024. But the Doha Round never concluded and the Appellate Body has not worked since 2019.
    • The CPTPP (12 members, 14.4 per cent of world output): in force for Australia since 2018, it opened new markets in Canada and Mexico and set deep rules. The UK joined in 2024.
    • AANZFTA (ASEAN, Australia and New Zealand, 12 parties): in force from 2010, it made 96 per cent of Australia's exports to ASEAN tariff free by 2020, up from 67 per cent. An upgrade took effect in April 2025. But it overlaps with RCEP and several bilateral agreements, adding to the noodle bowl.
  • Australia has 19 agreements in force. The newest (India 2022, UK 2023, UAE 2025, and the EU agreement concluded in March 2026) aim to diversify away from dependence on China.

Why Australia signs trade agreements

AnswersWhy does Australia pursue free trade agreements?

Cutting Australia's own tariffs helps Australian consumers and firms, but it does not help exporters facing tariffs abroad. Governments pursue trade agreements to complement their own tariff cuts, winning market access for exporters in return. Your notes add a second, newer reason: in a time of rising protection, agreements lock in existing rules, so trade relationships survive when other governments turn protectionist.

There are three types, and the terms are used loosely:

TypePartiesAustralian examples
BilateralTwo countriesANZCERTA, ChAFTA, A-UKFTA, India ECTA, UAE CEPA
Regional or plurilateralA group, usually in one regionAANZFTA, CPTPP, RCEP
MultilateralMost of the worldThe WTO agreements

In HSC questions, regional agreements are usually accepted as multilateral, as your notes treat them.

Australia now has 19 agreements in force, and the share of its imports coming from agreement partners rose from 36 per cent in 2010 to 74 per cent in 2022.

Bilateral example 1: ANZCERTA

AnswersWhat is the Australia–New Zealand Closer Economic Relations Trade Agreement?

What it is. The Australia–New Zealand Closer Economic Relations Trade Agreement, in force from 1 January 1983. It is the most comprehensive agreement Australia has signed.

What it did.

  • Removed all tariffs and quantitative restrictions on goods traded between the two countries by 1990, five years ahead of schedule.
  • Extended free trade to services from 1988.
  • Under the Trans-Tasman Mutual Recognition Arrangement (1998), a good that can legally be sold in one country can be sold in the other, and a registered worker in one can work in the same occupation in the other.
  • Moved towards a single economic market, with more standardised laws, business practices and food standards.

Strength. Its depth: goods, services, people and standards are covered, which removes non-tariff barriers that most agreements leave in place.

Limitation. New Zealand is a small market, taking 3.0 per cent of Australia's exports in 2024-25, so the gains to Australia's economy as a whole are modest. The depth came easily because the two economies already had similar institutions.

Exam question

Standard · about 3 min

2 marks

In 2024-25 Australia's exports to China were A$188.7 billion out of total exports of A$646.6 billion. Exports to New Zealand were A$19.7 billion. How many times larger were exports to China than to New Zealand? Round to one decimal place.

Hint 1Divide China by New Zealand.

Hint 2Total exports are not needed.

Hint 3Round to one decimal place.

Where students lose marks on this one
  • Dividing by total exports.

    Why it happens: Total exports is in the question.

    The question compares the two markets directly.

Written for this site.

Bilateral example 2: ChAFTA

AnswersWhat is the China–Australia Free Trade Agreement and what has it achieved?

What it is. The China–Australia Free Trade Agreement, in force from 20 December 2015.

What it did. Over a phase in period it removed Chinese tariffs on most Australian exports, including beef, dairy, wine, seafood and resources, and it raised the threshold for screening private Chinese investment in Australia.

Who Australia sells toIn 2025 China took 29.4 per cent of Australia’s exports, followed by Japan at 9.8 per cent.China overtakes Japan19901995200020052010201520202025010203040Calendar yearShare of exports (%)
  • China
  • Japan
  • United States
  • Korea
  • India
  • United Kingdom
The story is one replacement after another. Britain was the main market until the 1960s, when Japan took its place, and Britain’s entry to the European Economic Community in 1973 confirmed the shift. China overtook Japan in 2009 and has held first place since. China’s share rose from under 3 per cent to over a third in thirty years. India and Korea have grown steadily without approaching it. The United States share is small because the two economies produce similar things, not because trade between them is restricted.
The numbers behind this graph
YearChinaJapanUnited StatesKoreaIndiaUnited Kingdom
19892.524.111.64.4not published5.4
19902.524.211.94.9not published5.4
19912.625.110.65.2not published5.1
19922.823.69.55.3not published5.6
19933.223.09.15.9not published5.7
19943.722.78.36.3not published5.0
19953.721.17.87.4not published4.7
19964.219.18.08.2not published5.1
19973.918.18.86.9not published4.3
19983.718.010.95.7not published6.6
19994.117.311.26.01.76.1
20004.717.211.56.81.65.3
20015.617.010.46.71.95.9
20026.416.210.47.11.96.3
20037.715.59.76.42.78.2
20048.716.08.86.64.06.2
200510.417.37.66.84.55.5
200611.216.77.46.74.96.4
200712.615.67.27.05.15.6
200813.318.86.57.35.95.1
200919.015.96.17.07.25.4
201022.415.85.17.86.94.4
201124.416.44.97.95.73.8
201224.416.35.07.14.73.7
201329.015.35.16.63.62.7
201427.615.15.86.73.52.7
201526.813.07.16.34.32.9
201628.411.46.56.14.54.6
201730.012.25.76.15.23.0
201831.113.45.56.15.12.4
201934.212.35.45.74.44.3
202036.610.66.75.83.94.4
202136.412.55.07.34.71.7
202227.617.85.08.05.21.3
202332.313.45.46.55.22.1
202430.411.76.46.55.52.7
202529.49.89.06.74.94.7
2025
Largest market in 2025
China, 29.4 per cent of exports
The rest, in order
Japan 9.8, United States 9.0, Korea 6.7, India 4.9, United Kingdom 4.7
These six together
64.5 per cent of all exports
What was happening
China still takes over a quarter of exports. The jump in the United States and United Kingdom shares is mostly gold, whose price rose sharply.
Source
Department of Foreign Affairs and Trade, Australia's direction of goods and services trade, calendar years (1989 to 2006 historical file, updated September 2024; 2007 to 2025 file, updated August 2026)

Every slider is a normal range input, so the arrow keys move it one step and Home and End jump to the extremes.

Strength. China's share of Australia's exports rose from 26.8 per cent in 2015 to a peak of 36.6 per cent in 2020. In 2024-25 China took 29.2 per cent of exports, worth $188.7 billion. Australian wine, beef and dairy gained an edge over competitors without an agreement.

Limitation. From 2020, China restricted imports of Australian barley, wine, coal, timber, beef and lobster, while every ChAFTA tariff commitment stayed in force. The agreement gave no protection against political pressure. The restrictions were lifted gradually from 2023, the last in December 2024. The agreement also deepened dependence on one market, and some products, such as wheat, sugar and rice, were left out.

Common mistake

ChAFTA caused China to become Australia's largest export market.

Why it happens: China's share rose after the agreement took effect.

China became Australia's largest export market in 2009, six years before ChAFTA, because of its demand for iron ore and coal, which already faced low tariffs. ChAFTA mainly helped agriculture and services, which had faced higher Chinese tariffs.

Exam question

Standard · about 6 min

4 marks

Outline the China–Australia Free Trade Agreement (ChAFTA) and assess ONE strength and ONE limitation of it for Australia. (4 marks)

Hint 1When did it start and what did it remove?

Hint 2What happened to China's share of exports?

Hint 3What happened after 2020?

Where students lose marks on this one
  • Crediting ChAFTA with making China the largest market.

    Why it happens: The timing looks right.

    China was the largest market from 2009, driven by resources.

Written for this site.

Multilateral example 1: the WTO

AnswersHow does the World Trade Organization affect Australia?

What it is. The World Trade Organization, set up in 1995 to replace the GATT, which Australia signed as a founding member in 1947. It has 166 members covering about 98 per cent of world trade.

What it does for Australia.

  • Most favoured nation rule. Every member must give every other member its best tariff rate, so Australian exporters face the same tariffs as their competitors in any member's market, even without an agreement.
  • Negotiation. Australia leads the Cairns Group of agricultural exporters, formed in 1986, which pushed farm trade into the Uruguay Round (1986 to 1994) and helped secure the 2015 decision to end agricultural export subsidies.
  • Dispute settlement. Australia took China to the WTO over its 80.5 per cent duties on barley (2020) and its duties on wine (2021). China removed the barley duties in August 2023 and the wine duties in March 2024 while the cases were under way, and Australia suspended them.

Limitation. The Doha Round, opened in 2001 to cut agricultural protection, has never concluded, and the fourteenth Ministerial Conference, in March 2026, ended with no declaration. The Appellate Body has had no quorum since December 2019, so a losing party can appeal "into the void". Australia joined the stand-in Multi-Party Interim Appeal Arbitration Arrangement, which has 61 members including China, but the United States has not joined it, so disputes with the largest economy cannot be enforced through appeal.

Exam question

Standard · about 5 min

3 marks

Explain how Australia has used the World Trade Organization to advance its trade interests. (3 marks)

Hint 1Think about the most favoured nation rule.

Hint 2What is the Cairns Group?

Hint 3What happened with barley and wine?

Where students lose marks on this one
  • Saying the WTO forced China to remove the duties.

    Why it happens: The duties were removed during the case.

    China removed them in a negotiated settlement; no final ruling was enforced.

Written for this site.

Multilateral example 2: the CPTPP

AnswersWhat is the CPTPP and what does it mean for Australia?

What it is. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership, in force for Australia from 30 December 2018. It was formed by the eleven members that went ahead after the United States withdrew from the Trans-Pacific Partnership in 2017. The United Kingdom joined in December 2024, making 12 members with 14.4 per cent of world output.

What it did. It gave Australia its first free trade agreements with Canada and Mexico, improved access for beef, sugar, wine and dairy, and set rules that go beyond the WTO on services, investment, digital trade, state owned enterprises and labour.

Strength. One set of rules and rules of origin across 12 economies reduces the noodle bowl problem, and the agreement can grow: Costa Rica's accession was substantially concluded in May 2026.

Limitation. Most of its members already had bilateral agreements with Australia, so the extra tariff gains are small. China, Australia's largest trading partner, applied to join in 2021 but has not been admitted, so the agreement does little for Australia's most important trade relationship.

Alternatives. You can use AANZFTA (below) or RCEP (in force 2022; the ten ASEAN economies with China, Japan, Korea, Australia and New Zealand, 27.6 per cent of world output) as the second multilateral example instead.

Multilateral example 3: AANZFTA

AnswersWhat is the ASEAN–Australia–New Zealand Free Trade Area and what has it achieved?

What it is. The ASEAN–Australia–New Zealand Free Trade Area, signed in Thailand in February 2009 and in force for Australia from 1 January 2010. Its 12 parties are Australia, New Zealand and the ten members of ASEAN (Brunei, Cambodia, Indonesia, Laos, Malaysia, Myanmar, the Philippines, Singapore, Thailand and Vietnam). It was the first free trade agreement Australia negotiated with more than one country at once.

What it did.

  • Goods. Tariffs fell in stages, so that by 2020 96 per cent of Australia's exports to ASEAN entered tariff free, up from 67 per cent before the agreement. One set of regional rules of origin lets a product made from inputs from several member countries qualify, which suits supply chains spread across the region.
  • Services and investment. Commitments on market access, national treatment and most favoured nation treatment for service suppliers and investors.
  • The 2025 upgrade. The Second Protocol, signed on 21 August 2023 and in force from 21 April 2025, simplified rules of origin, added rules on digital trade (free flow of data across borders, limits on data localisation), competition and consumer protection, and a new Trade and Sustainable Development chapter covering labour rights, women's economic empowerment and the environment, the first in any ASEAN agreement.

Strength. ASEAN is a large and fast-growing market that complements Australia's economy: it buys coal, gas, wheat, gold, cotton and education, and supplies refined petroleum, vehicles and telecommunications equipment. In 2024-25 ASEAN took 12.6 per cent of Australia's exports and supplied 18.1 per cent of its imports. Your notes record AANZFTA as the most liberal of Australia's agreements for goods, and its third most used. Since 2020 it has also served Australia's aim of diversifying trade away from China.

Limitation. It overlaps with RCEP and with Australia's bilateral agreements with Singapore, Thailand, Malaysia and Indonesia, so firms must choose between several sets of rules for the same trade, the noodle bowl problem. Wide development gaps between members in income, skills, institutions and infrastructure mean poorer members phase in commitments slowly and gain less, and the agreement has no mechanism to share the gains across the region.

Common mistake

AANZFTA is a bilateral agreement between Australia and New Zealand.

Why it happens: That is ANZCERTA.

AANZFTA has 12 parties: Australia, New Zealand and the ten ASEAN members. It is a regional agreement, which HSC questions accept as multilateral. ANZCERTA (1983) is the bilateral agreement between Australia and New Zealand.

CheckpointAnswer before reading on.

Which of the following is a bilateral trade agreement?

Select one answer

Hint 1Bilateral means two parties.

Hint 2How many members does each option have?

Hint 3The CPTPP has 12 members.

The new agreements: diversification

AnswersWhat are Australia's most recent trade agreements for?

AgreementStatusKey features
Australia–India ECTAIn force December 2022An interim agreement removing tariffs on most Australian resource exports; a fuller agreement is still under negotiation
A-UKFTAIn force 31 May 2023Over 99 per cent of Australian goods exports to the UK duty free, with beef and sheep meat quotas expanding over about a decade
Australia–UAE CEPAIn force 1 October 2025Australia's first agreement in the Middle East, removing over 99 per cent of tariffs by 2029
Australia–EU FTAConcluded 24 March 2026, not yet signed98 per cent of Australian goods exports to enter the EU duty free once in force; signing expected at the end of 2026 or early 2027

Your notes record the collapse of the EU talks in October 2023 over agricultural access. They resumed in 2025, driven on both sides by the US tariffs, and concluded in 2026. Every agreement since 2020 has been presented at least partly as a way to reduce dependence on China.

Bilateral against multilateral for Australia

AnswersWhich type of agreement serves Australia better?

  • Bilateral agreements are quicker to negotiate and can be tailored, but they open trade only one country at a time, can divert trade from cheaper suppliers, and add to the noodle bowl. The Productivity Commission estimates businesses spent $1.4 billion to $4.1 billion in 2024-25 complying with rules of origin to claim preferences, compared with $1.9 billion of tariff revenue.
  • Multilateral agreements give the largest gains, because they open all markets at once and avoid diversion, and they protect a small economy like Australia with rules that bind large ones. But they are the hardest to reach, as the Doha Round shows.

Australia's view has been that multilateral liberalisation is best, with bilateral and regional agreements as the practical second best while the WTO stalls.

Exam question

Harder · about 7 min

4 marks

With reference to examples, compare the benefits to Australia of bilateral and multilateral trade agreements. (4 marks)

Hint 1Which is easier to negotiate?

Hint 2Which delivers larger gains?

Hint 3What is the noodle bowl?

Where students lose marks on this one
  • Describing each type separately without comparing.

    Why it happens: The question names both.

    Use comparative language: larger, quicker, narrower.

Written for this site.

Exam question

Standard · about 2 min

1 mark

A student writes: 'Because Australia has a free trade agreement with China, China cannot restrict imports from Australia.' What is wrong with this?

Select one answer

Hint 1What does an FTA bind?

Hint 2What tools did China use after 2020?

Hint 3Were the tariff commitments broken?

Where students lose marks on this one
  • Treating an FTA as a guarantee of access.

    Why it happens: Free trade sounds absolute.

    Agreements lower barriers; they do not remove political risk.

Written for this site.

Why ChAFTA could not stop China's restrictions

A free trade agreement binds tariffs. China's measures after 2020 used other tools: anti-dumping and countervailing duties on barley and wine (allowed under WTO rules if dumping is proven), unofficial customs holds and quarantine checks on coal, timber, beef and lobster. The first could be challenged at the WTO, and was. The second left no formal decision to challenge. This is why diversification became the main goal of Australian trade policy after 2020: agreements lower barriers but cannot guarantee access when a partner chooses to use trade for political ends.